Signal Generator

There is no code writing necessary to complete this application.

There is no need to know C#, Visual Basic, J# or C++ in order to create this application.

The tutorial covers the following steps, which should take less than one minute:

 Add a SignalGen Component to Your Application's Form  Add a Scope Control to Your Application's Form  Add a channel to the Scope control

 Connect the signalGen1.OutputPin to scope1.InputPins[0]  Run

the

Application

聽

1. Add a SignalGen Component to Your Application's Form:

2. Add a Scope Control to Your Application's Form:

3. Add a channel to the Scope control:

3.1. Double-click on the scope1 control on the form:

3.2. Add a channel in the ScopeChannel Collection Editor, and click OK:

4. Connect the signalGen1.OutputPin to scope1.InputPins[0]:

4.1. Select the signalGen1 component on the form:

4.2. In the signalGen1 Properties select OutputPin and click on the聽聽button:

4.2. In the connection editor check the InputPins.Channel0 of the scope1 and click OK:

5. Run the Application:

5.1 Press (F5) to run the application. You should see the wave form on the scope:

Here is a diagram of the聽OpenWire聽connections in this application: